华为eNSP与思科Packet Tracer命令对比基础配置命令设备命名华为eNSPsysname HUAWEI思科PThostname Cisco进入特权模式华为eNSPsystem-view思科PTenable接口配置华为eNSPinterface GigabitEthernet0/0/1ipaddress192.168.1.124思科PTinterface GigabitEthernet0/0ipaddress192.168.1.1255.255.255.0路由协议配置静态路由华为eNSPip route-static 10.0.0.0 24 192.168.1.2思科PTip route 10.0.0.0 255.255.255.0 192.168.1.2OSPF配置华为eNSPospf1area0network192.168.1.00.0.0.255思科PTrouter ospf1network192.168.1.00.0.0.255 area0VLAN配置创建VLAN华为eNSPvlan10description Sales思科PTvlan10name Sales接口分配VLAN华为eNSPinterface GigabitEthernet0/0/1 port link-type access port default vlan10思科PTinterface FastEthernet0/1 switchport mode access switchport access vlan10ACL配置基本ACL华为eNSPacl number2000rule permitsource192.168.1.00.0.0.255思科PTaccess-list1permit192.168.1.00.0.0.255NAT配置动态NAT华为eNSPnat address-group1200.1.1.10200.1.1.20 acl number2001rule permitsource192.168.1.00.0.0.255 interface GigabitEthernet0/0/2 nat outbound2001address-group1思科PTaccess-list1permit192.168.1.00.0.0.255ipnat pool MYPOOL200.1.1.10200.1.1.20 netmask255.255.255.0ipnat insidesourcelist1pool MYPOOL interface GigabitEthernet0/1ipnat inside interface GigabitEthernet0/0ipnat outsideDHCP配置服务器配置华为eNSPdhcpenableinterface Vlanif10 dhcpselectinterface dhcp server dns-list8.8.8.8思科PTipdhcp pool MYPOOL network192.168.1.0255.255.255.0 default-router192.168.1.1 dns-server8.8.8.8查看配置信息查看接口状态华为eNSPdisplay interface GigabitEthernet0/0/1思科PTshow interface GigabitEthernet0/0查看路由表华为eNSPdisplay ip routing-table思科PTshow ip route保存配置华为eNSPsave思科PTwrite memory或copy running-config startup-config备注华为命令多采用分段式配置如需先进入系统视图思科多采用直接命令。华为ACL编号规则2000-2999为基本ACL3000-3999为高级ACL。思科接口编号通常从0开始如G0/0华为常用0/0/1格式。